Rear
$764.00
The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way.
- SRAM AXS-enabled for easy personalization
- Orbit chain management technology keeps drivetrain quiet and secure
- A single rear derailleur for all gearing combinations, including 1x and 2x
- Improved motor and signal travel for faster shifting
- Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency
- Compatible with existing eTap batteries
- Battery sold separately
$753.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready.
- XC focus and trail ready
- Carbon cage
- Ti hardware
- Rainbow colorway
- Eagle technology
- Overload Clutch protection
- AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components
- System is completely water and dust proof to IP69K
- Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.
- Battery sold separately
$749.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it.
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- 1x specific for use with 10-44T XPLR and 10-36T cassettes
- SRAM AXS enabled, allowing easy personalization
- Chain management keeps the drivetrain quiet and secure
- Large X-SYNC pulleys for increased durability and efficiency
- Compatible with existing eTap batteries
- Cage Material (RD): Aluminum
- Pulley Bearings Material: Ceramic
- Max Tooth: 44
NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$538.00
It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings.
- Enduro focus and trail ready
- Forged aluminum cage
- Stainless hardware
- Black/Polar colorways
- Eagle technology
- Overload Clutch protection
- AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components
- System is completely water and dust proof to IP69K
- Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.
$390.00
Riders want a derailleur that shifts on command, whether under climbing load or sprinting to the stage finish. The GX Eagle AXS derailleur gets it done with everything you have come to expect from our AXS connect components. The GX Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. Engineered with a variety of rider preferences in mind, it is compatible with our new expanded range 10-52t cassette as well as our 10-50t cassette. Showcasing its lineage from the proven GX Eagle mechanical line, the GX Eagle AXS derailleur is there for one thing: to do the job.
Features
- AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components
- Overload Clutch protection
- Finished with the GX Eagle master colorway
- Battery sold separately
Specifications
- Speeds: 12
- Cage Material: Steel
- Pulley Bearings Material: Steel
- Max Tooth: 52
$338.99
Shimano Deore XT RD-M8050 Di2 Rear Derailleur
- Accurate and stable shifting in any condition
- Instant response
- Customized shift speed within Multi-shift
- Powerful shifting
- Seamless gear change even under high load
- Smart and efficient gear selection with Shimano Synchro Shift
- Single lever operation
- Rider-programmable shift mapping
- Drivetrain Speeds: 11
- Maximum Sprocket: 42T(2x11-speed)/46T(1x11-speed)
- Minimum Sprocket: 11T
- Front Difference: 10T
- Total Capacity: 35T
- Average Weight: 320 grams
$323.00
Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well.
- Updated cage geometry provides better chain retention and crisper shifting
- Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options
- Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes
$321.00
This one takes all your trail dreams, from XC to enduro, all the way to eleven. SRAM's XX1 rear derailleur packs a massive amount of technology into its compact, lightweight body. It uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$300.00
On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time.
- Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability
- Compatible with both 1x and 2x drivetrains
- 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes
- SRAM AXS-enabled, allowing easy personalization
- Spring clutch keeps the drivetrain quiet and secure
- X-SYNC pulleys for increased durability and efficiency
- 36T max rear cog
- Battery Not Included
$299.99
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further.
- Chain Stabilizer mechanism adopted from MTB design
- Stabilizer ON/OFF switch
- Compatible with current road dual control lever
- Shadow RD technology
- Direct mount compatible
- Maximum cog size: 34t
- Total capacity: 39t
$279.99 - $286.99
Shimano Ultegra Di2 Shadow rear derailleur.
- Sleek integrated appearance
- New low-profile design
- Shimano Shadow RD
- Race endurance
- Optimized slant angle
- Maintain race concentration with more intuitive shift control
- System communication with front derailleur
- Shimano Synchronized Shift
- Wide compatibility
- Short cage covers: 11-25T to 11-30T
- Medium cage covers: 11-28T to 11-34T
- Average Weight: 242 grams (SS type), 249 grams (GS type)
$243.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel.
- A dedicated 1x rear derailleur
- EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement).
- 10- and 11-speed compatible
- X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement
- X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force
- ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting
- Cage Lock technology makes for fast wheel changes or chain installation
- Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths
Short Cage:
Chain Wrap Capacity (teeth): 18 teeth
Largest Cog: 28
Weight: 250 g
Medium Cage:
Chain Wrap Capacity (teeth): 26 teeth
Largest Cog: 36
Weight: 262 g
Long Cage:
Chain Wrap Capacity (teeth): 32 teeth
Largest Cog: 42
Weight: 271 g
$236.00
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$230.00
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$225.00
This derailleur not only answers the Eagle drivetrain’s need for greater capacity, but it’s also the next evolution of SRAM's proven, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley allows 10- to 50-tooth cassette capacity in this relatively compact design, and also adds to Eagle’s overall smooth-pedaling feel. SRAM's Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. And a redesigned, robust mounting system further improves the Eagle derailleur’s performance and overall durability.
$214.00
Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well.
- Updated cage provides better chain retention and more precise shifts
- Backward-compatible design works with 10-50T and 10-52T cassettes
$134.99
The Box Two Prime 9 Rear Derailleur is very similar to the Box One version however, to be more wallet friendly, it offers a non adjustable Tri-Pack Clutch, bushing pulleys and some muted finishes. Box Two rear derailleurs are still optimized for 11-50t cassettes and offer durability and performance for the most demanding terrain, just at lower price!
$131.00
Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever.
• X-Actuation for precise and dependable 11-speed performance
• Focused chassis design for all conditions and usage
• 10-42-tooth wide range cassette compatible
$125.00
The GX derailleur not only answers the Eagle drivetrain’s need for greater capacity, but it’s also the next evolution of SRAM's, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley allows 10- to 50-tooth cassette, and also adds to Eagle’s overall smooth-pedaling feel. SRAM's Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. And a redesigned, robust mounting system further improves the Eagle derailleur’s performance and overall durability.
- Mounting system and re-positioned Cage Lock offer greater durability
- Sealed cartridge pulley bearings
- Will not work with front derailleur drivetrains
- Rear Derailleur Mount Type: 10x1 Standard
- Drivetrain Speeds: 12
- Cage Length: Long
- Chain Wrap Capacity (teeth): 40 teeth
- Largest Cog: 50
- Weight: 290 g
- Rear Der/Shifter Compatibility: SRAM X-Actuation
$123.00
SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever.
• Long cage
• X-Horizon design reduces shift force, ghost shifting, and chain slap
• 12-tooth X-Sync pulley wheels
• Large upper pulley offset automatically adjusts chain gap
• Sealed cartridge bearings
• Aluminum Cage
$118.00
Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.
$115.00
This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability.
- Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents
- Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact.
- Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology
- Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness
- Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation
- Speed (RD): 12s
- Cable pull ratio: X-actuation
- Cage (RD): Long
- Max tooth: 50
- Color (RD): Black
- Pulley bearings material: Steel
- Cage material (RD): Steel
$106.99
• 11-speed DynaSys compatible
• Light Shift Operation With 20% Less Effort
• Improved chain stability
• Efficient Shifting And Smoother Driving
• New Shadow Design With Optimized Slant Angle
• New Shift Cable With New Hyper Low-Friction Coating Technology
• New Shadow Design With Optimized Slant Angle For Stable Gear Position
• Easy-To-Adjust Chain Stabilizer
• Efficient Pulley Teeth Design
• Direct Mount compatible
$89.99
Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch.
- Medium Cage (for 2x10 drivetrains)
- Long Cage (for 3x10 drivetrains)
- For use with Shimano 10-speed drivetrains
- High-efficiency drivetrain for aggressive trail riding
- Optimized gear combinations and ratios for trail riding
- Maximum chain wrap capacity: 41T (medium cage)/43T (long cage)
- Largest cog: 42T (medium cage)/36T (long cage)
- Compatible with wide range cassette
- Silent and stable for technical trail riding
- Improved stability and chain retention longevity
- Light shifting effort
- OPTISLICK cable
- Smooth and precise shifting
- DYNA-SYS compatible system
$87.00
SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch.
- X-Horizon design reduces shift force, eliminates ghost shifting and chain slap
- Compatible with 10-speed and 11-speed SRAM 1x road systems
- With Cage Lock technology, wheel removal and installation are easier than ever
- Equipped with Roller Bearing Clutch
- Large upper pulley offset automatically adjusts chain gap
- Weight: 314 grams
- Outer Cage: Steel
- Compatibility: 10-speed and 11-speed SRAM 1x road systems
- Inner Cage: Steel
- Cage Size: Long
- Max Tooth: 42t
- Pulleys: Sealed cartridge bearings
- Pull: Exact Actuation
$87.00
The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever.
- X-HORIZON design that reduces shift force, ghost shifting and chain slap
- 12-tooth X-SYNC pulley wheels
- Fully compatible with all SRAM MTB 1x drivetrains
- Most affordable fully featured 1x rear derailleur in the industry
- Speeds: 11-speed
- Weight: 322 grams
- Color: Black
- Compatibility: X-ACTUATION
- Bearings: Steel
- Cage Size: Long
- Max Tooth: 42
$85.00
SRAM's XX1 Ceramic Bearing Rear Derailleur Pulleys run on super-smooth, efficient ceramic bearings so your drivetrain rolls with ease. They are lighter than conventional pulleys and even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe.
$83.99
Shimano's Ultegra Rear Derailleur delivers category-defining 11-speed shifting. At the heart of the derailleur is a light, tough, cold-forged-aluminum body with a wide, rigid pivot design that maximizes shifting speed and equalizes shift effort across the cassette. Smooth-spinning pulleys use sealed bearing to keep out the dirt and ensure quiet running in the miles to come.
$78.99
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range.
- Advanced shifting performance provides the confidence to enjoy any trail
- Fast and shockless shifting
- Hyperglide+
- Extra wide range 12-speed drivetrain
-10-51T (12-speed)
- Silent drivetrain in all gear positions
- Decreased rear derailleur and chain tension in low gear
- New bumper added to rear derailleur pulley cage
- Bump Stopper
- Bigger 13T pulley
- Stable drivetrain on rough terrain
- Low-profile design
- Shimano Shadow RD+
$76.99
- Rider Tuned For Sharp And Silky Shifts
- 20% Light Shifting Operation
- New Shadow Design With Optimized Slant Angle
- Optislick New Shift Cable With New Hyper Low-Friction Coating Technology
- Chain Stability Improved
- New Shadow Design With Optimized Slant Angle For Stable Gear Position
- Efficient Shifting And Smoother Driving
- Efficient Pulley Teeth Design
- Increased Traction Range For Long-Travel And Active Rear Suspension
- Series : SLX: SLX
- Maximum Sprocket : 42T(2x11-speed) or 46T(1x11-speed)
- Minimum Sprocket : 11T: 34-38T
- Front Difference : 10T: 48.8
- Total Capacity : 41T: 66-69
- Average Weight : 323g: 145.6g
Page 1 of 2
Next page