Wheels

The all-new SLR 1 36 Disc WheelSystem provides high-performance versatility, combining maximum power transmission with optimal stiffness, efficiency and weight savings to make it as quick on the climbs as it is confident on the descents.

HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames. Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too. Additional Info - Rim Type: 85mm - Rim Material: Carbon - Rim Weight: 445g - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 564 (includes washer)

The all-new SLR 1 36 Disc WheelSystem provides high-performance versatility, combining maximum power transmission with optimal stiffness, efficiency and weight savings to make it as quick on the climbs as it is confident on the descents.

For 27.5-inch fatbikers looking to upgrade to carbon, the lightweight No.9 76w rim offers all the simplicity of a tubeless setup. Ready to roll over obstacles and give riders a longer contact patch, it’s optimized for use with tires measuring 4–5-inches. We’ve narrowed the spoke bed to reduce weight, and we’ve utilized a large, reinforced rim wall edge to withstand impacts related to running low pressures. Thanks to our convex rim profile designed to roll right through sand and snow, paired with our double-wall construction, all-season riding is within reach.

Trail riders, fatbike racers, and ultra-endurance athletes looking to add a refined, lightweight, tubeless wheelset to their fat bikes need look no further than Whisky's No.9 70w rim. While it’s optimized for use with 3.8–4.6-inch tires, it’s compatible with tires up to 5.05-inches wide. It utilizes a double-wall construction to ensure a sturdy, stout rim profile that maximizes cornering stability. With an inner width of 65mm, fat tires mimic the look and feel of traditional mountain bike tires when mounted to the 70w. That combo offers unmatched trail-attacking traction with a confidence-boosting wide footprint, making it one of the most versatile fat rims on the market.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

The No.9 Carbon GVL rim’s low rotational weight and the aerodynamic benefits of its 35mm-deep rim profile help you conserve energy over miles of rollers, false flats, and whatever else your gravel rides throw at you. The 23mm internal width pairs well with tires ranging from 32mm to 2.2-inches wide for versatility in unpredictable conditions. The asymmetric rim profile equalizes spoke tension and angles for stronger, stiffer builds, making the No.9 Carbon GVL a solid foundation for wheels that will take your gravel bike to the next level. - Recommended rider weight limit is 240 lbs. - 85 PSI maximum tire pressure on a 32c tire - Weight: 435g - For tires 32mm – 2.2-inches

40w rims are the choice for the truly big tires out there. Providing ample support for high volume, modern mountain bike and plus tires, 40w’s are a great compromise between width, weight, and stiffness. If you’re looking to up the game on your big-tired mountain bike, these are a great place to start a build. As with all Whisky rims, these include the tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs - 50psi max tire pressure

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Dependable Independence – Reliability, versatility, and simplicity are united in a hub. Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. PRODUCT DETAILS: - A DEPENDABLE HUB The freehub Ratchet System makes the 350 the dependable partner for any ride - NO TOOL CONCEPT Plug-in hub construction allows for quick and tool-free maintenance - NEW ENDCAPS The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly - VARIETY The 350 hub is available for all common axle standards and for the various drivetrain systems. TECHNOLOGY: We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies. LEGENDARY RELIABILITY: The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability. The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

Comfort joins speed. PR 1600 wheels work perfectly with wider tires, which results in more comfort in the saddle and more grip on the road. These wheels excel on any terrain, transfer every bit of energy into forward momentum and take every corner with Swiss precision. - 350 based Spline hub - Straight-pull hub and spokes are radial laced - Includes steel RWS skewer, tubeless ready tape and tubeless valve

Chris King ISO XD Driveshell assembly, complete with bearings.

The Fat Conversion Rear hub provides the ultimate in fatbike hub versatility by allowing hub conversion between quick-releases and thru-axles. 170/177mm features - Convertible 10 x 170mm QR/12 x 177mm Thru-Axle spacing - Four sealed cartridge bearings - Serviceable three-pawl freehub mechanism - 58mm flange diameter, right center to flange: 37mm, left center to flange: 44mm - Thru Axle and Q/R Conversion end caps included - 170mm Flip-Off skewers included - XD freehub and conversion caps also available separately 190/197mm features - Convertible 10 x 190mm QR/12 x 197mm Thru-Axle spacing - Four sealed cartridge bearings - Serviceable three-pawl freehub mechanism - Thru Axle and Q/R Conversion end caps included - Flip-Off skewer not included - 422 grams

Centerlock hubs on tubeless-ready rims. Includes convertible endcaps for Quick-release and Thru-Axle

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

A rock-steady classic for road riding. - 18mm inner width - Professional tubeless tape installation included

HED Belgium G alloy rims make any custom wheel build that much sweeter. With 30mm external and 25mm internal widths, you can add tire volume, smoothness, and rolling speed to any bike or hub set. All Belgium rims feature a welded rim joint, and are drilled for a standard presta valve. Spoke drilling is down the centerline of the rim (not offset). Please carefully read the specifications below to find out detailed information on the different rims we offer. 700c - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Counts: 24, 28, 32 - Color: Black - Brake Track: N/A - Wheel Size: 700c - Weight: 453 grams - Max Pressure: 80psi - ERD: 592mm 650B - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Counts: 28 and 32 - Color: Black - Brake Track: N/A - Wheel Size: 650b - Weight: 426 grams - Max Pressure: 80psi - ERD: 555mm

The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond. - Aluminum welded construction, hooked tubeless design - PHR – Pro Head Reinforcement system increases the load-bearing surface of the nipples on the rim and reduces localized stresses - Provides a 17% increase in pinch flat resistance compared to the previous FR 560 rim - Disc brake only

My Other Brother Darryl is a single-wall constructed, 80mm wide rim. 80mm wide rims give you a bigger footprint than that of narrower rims, which means more floatation and more traction. To initiate tubeless sequence, you just need a no-stretch rim strip and bead-to-bead tubeless rim tape. My Other Brother Darryl comes with either a 32 hole, symmetric wheel lacing spoke hole pattern or the tried and true 64 dual spoke hole pattern that allows for symmetric or offset wheelbuilds. It's got plenty of cutouts to keep the weight down and help your tires float through the squishiest of terrain. - Wheel Size: 26 - Hub Compatibility: 32h - ETRTO*: 559mm - Weight: 710g (Symmetric) 740g (Dual) - Color: Black or polished silver *Tire bead seat diameter.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Legendary tubeless technology has now been hand delivered to the plus-sized market. Why have a 2.8+ inch tire if you can’t experience a lovely tubeless ride? The Scraper rim features a TCS inner rim profile, 4D angled drilling, and WTB's light but stiff WT69 Alloy, all while still allowing for popular and available J-bend spokes. Yep, non-proprietary spokes but a high tech rim. The Scraper i40 is designed for 2.8" tires while the i45 is optimized for 3.0" tires. Experience TCS euphoria with WTB's Scraper rim and understand what this plus-sized grinning is all about. - Usage: Adventure/Plus Sized Tires/Bikepacking

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3'' mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

This rim can take heavy loads and cope with demanding surfaces at the same time! Are you searching for a pair of rims to ride off the beaten path? If so, the RR481 may be the perfect option for you. With an inner width of 22mm and approved up to a 130kg system weight, this extremely durable rim is made for rough, off-road rides. Whether you mount them on your Cyclocross bike, your gravel racer, or for your next bike-packing trip, the RR 481 won't let you down.

As versatile as it is robust—a rim for all surfaces! Anyone wanting to build a reliable, super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art alloy and surface treatment, this extremely robust 32mm high semi-aero rim is lighter than you would think. And, those thinking of using it on Gravel or Cyclocross courses can easily install tubeless tires.