A coffee or beer after a long ride is the perfect way to relax and discuss your performance or the events of that day with your buddies. But where do you leave that helmet?! You can lay it on the table, hang it on your bike, or even keep it on your head, but none of those solutions are really ideal. And how do you secure your bike without carrying a lock at all times? You want to store your helmet somewhere and not have to look over your shoulder every five minutes to check if your bike is still there. Wouldn’t it be great if there was a way to store your helmet and lock your valuable bicycle safely at the same time?! That problem is now solved with the arrival of the Cappuccinolock. The Cappuccinolock is a revolutionary way to secure your helmet using only your helmet straps. Slide the male part of your buckle into the lock on one side and connect the female part of your buckle on the other side of the lock. Twist the numbers to ensure the lock can’t open and relax while you have your coffee. Use it to lock your helmet to prevent it from getting stolen or use the helmet straps to secure your helmet and your bicycle at the same time. Lock it, roll it, leave it!
Lose your kid's Baby Nutty Helmet pads? Or did they just get a little too much loving? Replacement pad sets for your Baby Nutty helmet. Each set comes with two of: - 3mm pads (front and rear) - 6mm pads (front and rear) - 6mm crown pad
No two heads are exactly the same. Give your Nutcase Metroride helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm and 9mm thicknesses.
No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable
- DIY Kit brings the LifeBEAM Heart Rate Sensor to the Z1 helmet. - Contains sensor, headband, processor, Mudcap, charge cable, and manual - Lazer's Z1 Helmet sold separately - Rechargeable battery is included in the sensor unit The Lazer and LifeBEAM cooperation is the first time wearable technology has been used in cycling helmets. The LifeBEAM application is the only device that can be placed in a cycling helmet to continuously measure the rider’s heart rate with no chest strap needed. This technology senses your body while you ride and gives you an accurate analysis of your performance, while protecting your head. Initially it was developed by LifeBEAM to monitor the vital signs of pilots and astronauts, but now you can have the same the same technology on your weekly rides. Why? Personal heart rate provides a window to an individual’s fitness and athletic ability. When you keep track of your heart rate during your exercise, you will be able to ensure the safety of your fitness program. Keeping your heart rate within a normal range ensures yourself that you are training in a safe and productive way. And nothing is easier than using the Lazer LifeBEAM combination to measure your heart rate, no chest strap needed. LifeBEAM Gear: The helmet seamlessly pairs to fitness devices and smartphones through ANT+ and Bluetooth 4.0 protocol and displays the rider’s real-time heart rate. The proprietary optical sensor and algorithm were developed, tested, and perfected in the aerospace industry under extreme conditions. As a result, LifeBEAM technology is completely motion resistant, so it can be used on any terrain, even the most intense MTB trails. The LifeBEAM device is also truly all-weather, performing well in any condition such as rain, humidity, and extreme hot and cold climates. Once you start using the helmet you can easily connect it with most fitness apps, fitness devices & mobile devices. All you have to do is put the helmet on your head and turn on the LifeBEAM unit at the back of the helmet. As soon as the sensor makes contact with the skin, the brain unit will send out your heart rate data to a connected device, displaying it in real-time
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
Replacement visor for Kask's Bambino Pro TT helmet.
Replacement pads for Kask's Rapido helmet.
The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
- Protextura Plus fabric for water-proof protection while maintaining high breathability - Designed to fit most helmets - Reflective trim and bright yellow color enhances visibility in low light or foggy conditions - Drawcord in the hem helps fit a wide variety of helmet shapes
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
Page 1 of 1