Parts & Accessories
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
A coffee or beer after a long ride is the perfect way to relax and discuss your performance or the events of that day with your buddies. But where do you leave that helmet?! You can lay it on the table, hang it on your bike, or even keep it on your head, but none of those solutions are really ideal. And how do you secure your bike without carrying a lock at all times? You want to store your helmet somewhere and not have to look over your shoulder every five minutes to check if your bike is still there. Wouldn’t it be great if there was a way to store your helmet and lock your valuable bicycle safely at the same time?! That problem is now solved with the arrival of the Cappuccinolock. The Cappuccinolock is a revolutionary way to secure your helmet using only your helmet straps. Slide the male part of your buckle into the lock on one side and connect the female part of your buckle on the other side of the lock. Twist the numbers to ensure the lock can’t open and relax while you have your coffee. Use it to lock your helmet to prevent it from getting stolen or use the helmet straps to secure your helmet and your bicycle at the same time. Lock it, roll it, leave it!
- DIY Kit brings the LifeBEAM Heart Rate Sensor to the Z1 helmet. - Contains sensor, headband, processor, Mudcap, charge cable, and manual - Lazer's Z1 Helmet sold separately - Rechargeable battery is included in the sensor unit The Lazer and LifeBEAM cooperation is the first time wearable technology has been used in cycling helmets. The LifeBEAM application is the only device that can be placed in a cycling helmet to continuously measure the rider’s heart rate with no chest strap needed. This technology senses your body while you ride and gives you an accurate analysis of your performance, while protecting your head. Initially it was developed by LifeBEAM to monitor the vital signs of pilots and astronauts, but now you can have the same the same technology on your weekly rides. Why? Personal heart rate provides a window to an individual’s fitness and athletic ability. When you keep track of your heart rate during your exercise, you will be able to ensure the safety of your fitness program. Keeping your heart rate within a normal range ensures yourself that you are training in a safe and productive way. And nothing is easier than using the Lazer LifeBEAM combination to measure your heart rate, no chest strap needed. LifeBEAM Gear: The helmet seamlessly pairs to fitness devices and smartphones through ANT+ and Bluetooth 4.0 protocol and displays the rider’s real-time heart rate. The proprietary optical sensor and algorithm were developed, tested, and perfected in the aerospace industry under extreme conditions. As a result, LifeBEAM technology is completely motion resistant, so it can be used on any terrain, even the most intense MTB trails. The LifeBEAM device is also truly all-weather, performing well in any condition such as rain, humidity, and extreme hot and cold climates. Once you start using the helmet you can easily connect it with most fitness apps, fitness devices & mobile devices. All you have to do is put the helmet on your head and turn on the LifeBEAM unit at the back of the helmet. As soon as the sensor makes contact with the skin, the brain unit will send out your heart rate data to a connected device, displaying it in real-time
The PWR helmet extension mount is designed for use with the PWR modular lights. Use it to attach the lighthead to your helmet so you can stash the battery in your backpack. - Compatible with the PWR Road, PWR Trail, and PWR Mountain light heads - Internal screw is made of nylon plastic and is designed to snap in case of accidents for rider helmet protection - Fits most vented helmets, common for road and trail cycling - Stretched cable length: 80cm - Weight: 100g
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
Page 1 of 1