Filter By:
Tools & Tuning
$36.00
Protects the wax base during transport and is easy to prepare for the next training session.
A versatile hard glide wax. Used by Racing Service and ski factories as a transport wax and as an effective preparation for the next summer snow training session.
- Easy to apply with a waxing iron.
- Easy to scrape and brush.
- Fluoro-free
$36.00
Protects the wax base during transport and is easy to prepare for the next training session.
- Wide range of applications, 0°C to -10°C.
- Easy to apply with a waxing iron.
- Easy to scrape and brush.
- Fluoro-free
$36.00
BP099 is a soft wax with a low melting point. Recommended as the first layer on new skis. BP99 is also recommended for skis or snowboards in the “Hot Box”. The temperature in the Hot Box must never be higher than 55°C. Temperatures higher than 55°C may cause delamination of the base.
- Soft wax with a low melting point
- Recommended as the first layer on new skis.
- Base prep wax.
$20.00
F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses.
- Universal wax for all temperature ranges
- Glide wax for ski mountaineering and summer skiing
- Preservative wax for metal edges
- Easy application
$20.00
Gives faster skis.
Cleaner & conditioner glide sections of racing skis and snowboards.
- Ski Cleaner for glide zone.
- For everyone who waxes their skis.
Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$30.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training.
About HS10L: A liquid training and racing wax that can be used alone or as a base for other glide products. HS10L is optimized for very wet conditions when the snow has been transformed. Ideal in spring for dirty snow conditions. A good choice that never underperforms in warm conditions.
How to apply HS10L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt.
Features:
- Fantastic for warm conditions
- Improves ski glide
- For training and racing
- Fluoro-free and 100% biodegradable
- Also available as hot wax
- Thoroughly tested in different conditions
$40.00
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F).
Details:
- A popular wax in nordic disciplines
- Good water repellent properties
- Replaces LF10X
- For training and competition
Highlights:
- For warm conditions
- Easy to work with
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Well tested on many conditions
$40.00 - $100.00
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow.
- HS5 can be used as a race wax alone or as a base for top coats.
- Recommended iron temp: 150°C (311°F).
- -10°C to -18°C (14°F to 0°F).
$40.00
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F).
Highlights:
- Fantastic allround glider
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Exists also in liquid
- Well tested on many conditions
$30.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training.
About liquid HS6: A liquid training and competition slide wax that can be used alone or as a base for racing products. Specifically designed for cold conditions down to -12°C. At lower temperatures than this, traditional waxes are usually better than liquid products. HS6L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high.
How to apply HS6L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt.
- Amazing universal glide wax
- For training and racing
- Improves ski glide
- Fluoro-free and 100% biodegradable
- Also available as hot wax
- Thoroughly tested in different conditions
$30.00
Liquid glide wax for racing and fast training sessions. HS7L is recommended from -2 to -8 degrees.
- A very good glide wax for traditional winter conditions
- No need for a waxing iron
- Replaces CH7XL.
$40.00 - $300.00
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F).
Highlights:
- Fantastic allround-glider
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Well tested on many conditions
$30.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training.
About HS8L: A liquid training and racing wax that can be used alone or as a base for other glide products. The HS8L is extremely versatile on both sides of zero with very good feedback from racing service. It works just as well on old snow at minus temperatures as falling fresh snow and plus degrees. Quite simply a “must have” product for conditions you will encounter frequently.
How to apply HS8L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt.
- Amazing glide wax that is easy to apply
- For training and racing
- Improves ski glide
- Fluoro-free and 100% biodegradable
- Also available as hot wax
- Thoroughly tested in different conditions
$40.00
A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X.
Highlights:
- Easy to work with
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Well tested on many conditions
$16.00
Ski cleaner for cleaning ski bases and removing wax and klister. Spray on the base, remove as much wax as possible with a scraper and wipe with Fiberlene. The active ingredient in this ski cleaner is a low-aromatic hydrocarbon which has a good effect on grease and dirt. The aerosol has propellant gas that does not damage the ozone layer and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless.
*Danger: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Repeated exposure may cause skin dryness or cracking.
$25.00
Ski cleaner for cleaning ski bases and removing wax and klister. First remove as much wax as possible using a scraper. Dampen a piece of Fiberlene with ski cleaner and rub until the wax/dirt is dissolved. Wipe with dry Fiberlene. The active ingredient in this liquid ski cleaner is low-aromatic hydrocarbon, which has a good effect on grease and dirt. The aerosol has a long shelf life and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless.
$30.00
Waxing pack for cross-country skis.
- Convenient pack
- For normal dry wax conditions
- For those who want a better skiing experience
- Everything you need to achieve good grip
$15.00 - $40.00
A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability.
The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance.
- Recommended iron temp: 155°C (311°F).
- Replaces the CHX4.
- -14°C/-32°C (7°F to -26°F).
$15.00
PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F).
- A versatile wax for warm conditions
- Low melting point and easy to apply
$15.00 - $40.00
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F)
- Recommended iron temp: 150°C (311°F).
- Replaces the CH5X.
- -10°C to -18°C (14°F to 0°F).
$15.00 - $40.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F).
- Recommended iron temp: 145°C (293°F).
- Replaces the CH6X
- -6°C to -12°C (21°F to 10°F).
$40.00
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F).
- Recommended iron temp: 140°C (284°F).
- Replaces the CH7X.
- -2°C to -8°C (28°F to 18°F).
$15.00
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F).
- Recommended iron temp: 130°C (266°F).
- Replaces the CH8X.
- -4°C to +4°C (25°F to 39°F).
$80.00
Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.
- Durable glide wax
- A favorite for classic long-distance skiing
- Hard wax
- Can be used with roto wool
- For all skiing
- Ski wax
$80.00
Designed specifically for longer distances on newer and clean snow. Excellent in warm conditions, but also very competitive at lower temperatures. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.
$52.60
Round outdoor wall thermometer for cross-country skiing. Perfect for your cabin wall. Shows you which wax or klister to use for a perfect day skiing. Hang in the shade. Ø 30 cm.
$12.00
Practical protective tape for racing alpine skis.
- This prevents glide wax from dripping onto the alpine bindings
- 51 mm x 50 meters.
- Easy to remove
$25.00
Protects integrated skins from icing and improves glide properties. Recommended maintenance for skin skis to extend their life span and get a better ski experience. To be applied before skiing.
Highlights:
- Boost the perfomance of skin skis
- Easy to use
- Apply before skiing
- Must have when using skin skis
- Fluoro free ski wax
- Swix ski wax
- Made for Cross Country Skiing
*Danger: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
$25.00
Cleans integrated skins in a gentle way without affecting the skin glue. Restores the properties of the skin and increases its efficiency. To be used after skiing.
- Can also be used for backcountry skiing
- Easy to use
- Apply after skiing
- Must have when using skin skis
- Fluoro free ski wax
- Swix ski wax
$10.00
Steel scraper for experienced waxers.
Sharp steel scraper for peeling or straightening bases.
Page 1 of 3
Next page